dv@well.UUCP (David W. Vezie) (09/08/86)
We have an Emulex TC13 tape controller running a Kennedy 9400 tape drive on a VAX 11/750 running 4.2 BSD, and have a mildly aggravating problem. Whenever anyone runs mt offl (UNLoad the tape), the tape gets unloaded fine, but the 'mt' hangs until the drive is turned off. We are using the TS-11 driver (ts.c) (which is another source of aggravation - because ts.c doesn't support multiple tape densities). The ts0 is configured as: controller zs0 at uba? csr 0172520 vector tsintr device ts0 at zs0 drive 0 Is there some other driver that will work better for this combo? Or is there some fix to ts.c to fix the problem? (I'm not concerned as much about the multiple tape densities as I am about mt offl). Thanks in advance for any help. --- David W. Vezie {dual|hplabs}!well!dv - Whole Earth 'Lectronics Link, Sausalito, CA (4 lines, 113 chars)