spaf@cs.purdue.EDU (Gene Spafford) (12/10/88)
These suggestions are from the folks at the CERT (Computer Emergency Response Team) at the SEI. This group has been established by DARPA to help coordinate responses to computer security problems and breakins on the DARPA Internet. The comments below are actually applicable to a wider audience, so I am reposting them. Reply-To: cert@cert.sei.cmu.edu Cc: cert@cert.sei.cmu.edu Subject: Stock message Date: Fri, 09 Dec 88 18:39:36 EST From: Mark Poepping <poepping@cert.sei.cmu.edu> All comments are truly appreciated, we need to be sure we are accurately representing the best information. cert@sei.cmu.edu ------------- There have been several problems or attacks which have occurred in the past few weeks. In order to help secure your systems we have gathered the following suggestions: 1) Check that you are using version 5.59 of sendmail with the debug option DISABLED. To verify the version try the following commands. Use the telnet program to connect to your mail server. Telnet to your hostname or localhost with 25 following the host. The sendmail program will print a banner which will have the version number in it. You need to be running version 5.59. Version 5.61 will be released on Monday 12/12/1988. Any version less than 5.59 is a security problem. The following is a sample of the telnet command. % telnet localhost 25 Trying... Connected to localhost.SEI.CMU.EDU. 220 ed.sei.cmu.edu Sendmail 5.59 ready at Wed, 7 Dec 88 15:45:55 EST Quit 221 ed.sei.cmu.edu closing connection Connection closed by foreign host. % 2) Verify with your systems support staff that the ftpd program patches have been installed. Removing anonymous ftp is now known to NOT plug all security holes. If you are not sure, ftp to ucbarpa.berkeley.edu, login as anonymous password ftp and get ftpd.shar. This file contains the sources to the latest BSD release of the ftpd program. 3) Check your /etc/passwd file for bogus entries. Look for unauthorized accounts with the uid field set to zero (only the root account should have uid=0). Remove any unauthorized entries. The following is an example of what you might find. install::0:1::/: To check your /etc/passwd files for spurious accounts with uid 0, you can use the following awk program: % awk -F: '$3 == 0 {print $0}' /etc/passwd If you are running YP on your machine, do: % ypcat passwd | awk [...as above] 4) Look for modified /bin/login and /usr/ucb/telnet files. Several sites have found these programs with new "backdoors" added. Use the strings program to search /bin/login for the strings OURPW, knaobj, and knaboj. If in doubt, reload the /bin/login and /usr/ucb/telnet executables from your distribution tape. % strings /bin/login | egrep '(OURPW|knaboj|knaobj)' 5) Educate your users to create hard to guess passwords. Account codes, first or last names, and common words are not very secure passwords. A few examples of common words are words that refer to your town, location, or company and words that are found in /usr/dict/words. Be especially careful of accounts where the password is the account name (easy to check, easy to guess. 6) In general, before you allow a user access to the Internet, you must be sure you know who they are. In other words, all users should be forced through a login/password sequence (no unpassworded accounts and preferably someplace which logs connections) before you let them get outside your local network. Be especially careful with TCP/IP terminal servers. 7) check the last logs for normal logins as accounts which normally run utility programs (sync, who, etc), watch for unreasonable times.. watch for ftp's with funny logins (who, etc). If you need additional information please call CERT at 412-268-7090. -- Gene Spafford NSF/Purdue/U of Florida Software Engineering Research Center, Dept. of Computer Sciences, Purdue University, W. Lafayette IN 47907-2004 Internet: spaf@cs.purdue.edu uucp: ...!{decwrl,gatech,ucbvax}!purdue!spaf