mcdonald@uxe.cso.uiuc.edu (01/05/89)
>I am trying to use the DVI8514 display previewer on an IBM 6152 Academic >System. The DVI8514 driver is the one that I got off of b.scs.uiuc.edu >written by Doug McDonald (based on the Beebe drivers). When I run the >previewer it says that "No 8514 driver found". The IBM diagnostics tell >me that there is indeed a 8514/A in the machine. Is there anything else >I have to set up in my config file? The machine is on loan from IBM and >has NO documentation and NO other diskettes besides the Reference Diskette. >Any help would be appreciated. Yes, you need an additional file. You need the file that contains the software driver for the 8514. It comes with the 8514, not the computer. It goes in the autoexec, not the config.sys. I forget the name. Try to find the 8514 diskette. If that fails, I can send the file to you (assuming the network works!). I forget the name of the file, something like, just maybe, hdiload.exe? > My mail to Doug Mcdonald has bounced back. Our nameserver is dead. I can't even ftp myself(!) without giving the actual internet address, which is mcdonald@128.174.5.54 . Doug McDonald (mcdonald@uxe.cso.uiuc.edu , same as above) .