chris@byucsa.UUCP (Chris J. Grevstad) (08/07/84)
<> We need some help with our new Eagle drives that we just got. We are running 4.2BSD on a vax 11/750 with the Eagles on the massbus. The controller is an Emulex SC750/B1. The problem we are having is when I go to format the disk, the formatter tells me the following: Device data: #cylinders=559, #tracks=14, #sectors=31 I know that is not the case. It should be 842,20,44. We have already configured the controller to emulate a rm02 logical drive. We have called our suppliers and they say that the factory set-up is ok. Prior to this we were running CDC Winchesters (9730, I think) and we had no problems. Any suggestions as to what I should do? Do I need to change something in the kernel? Are there some tables somewhere that I need to change? The instal- lation guide indicates that 4.2BSD will support Eagles, and the format program claims the ability to format Eagles. I'm lost! HELP! Please reply to harpo!utah-cs!beesvax!byucsa!chris -- Chris Grevstad Life is hard for the organizationally impaired.