mo@seismo.CSS.GOV (Mike O'Dell) (02/24/86)
I have a Ventel 212 modem of older vintage, ie, one with only ONE 10-position dip switch on the back, and 9 jumpers on the digital board inside. I am trying to get it working and suspect it has been configured for answer-only use, or some such. I am trying to find documentation about setting the thing up, etc. Any help at all would be immensely useful. I put the thing in analog loopback mode, and it passes data in high-speed and low-speed modes; it also passes the internal SelfTest in analog loopback. Further, I need to make a phone cable for it, so pinouts for the 15-pin telephone connector is also of interest. Thanks if you can help. -Mike