avolio@decuac.UUCP (03/14/87)
[Why haven't we seen this in mod.computers.vax? Things still not working?] In article <4929@brl-adm.ARPA>, @EDDIE.MIT.EDU:JBS@DEEP-THOUGHT.MIT.EDU (Jeff Siegal) writes: > I found this message on INFO-VAX. > --- > Date: Mon, 9 Mar 87 13:45:04 est > From: Scott Shurr <sshurr%wellesley.edu@RELAY.CS.NET> > Subject: UUCP > > I am attempting to set up uucp on an ULTRIX 1.2 system, using a > Penril 8216 modem. My efforts to write an entry in /etc/acucap > for this modem have failed. Has anyone out there got an /etc/acucap > entry for this brand of modem that works? > > I've attempted to debug this by running /usr/lib/uucp/uucico in the > debug mode with the switch -x9. When I do this, I get a lot of > information up to:... Let me start by saying I don not have a brilliant answer (never do..) for this, but let me suggest some things. 1. To debug acucap under Ultrix, set the debug flag on the acucap entry. If you entry was: df112|df124|DF112|DF124|DEC df112:\ :cr:hu:re:ls:ss=^B:sr=Ready\r\n:sd#250000:di=T:fd#40:\ :dt=#:dd#50000:os=\r\nAttached\r\n:rs==: add a "db:" at the end, as in df112|df124|DF112|DF124|DEC df112:\ :cr:hu:re:ls:ss=^B:sr=Ready\r\n:sd#250000:di=T:fd#40:\ :dt=#:dd#50000:os=\r\nAttached\r\n:rs==:db: 2. Do not LINK dialout ports to other names! (See your release notes for a note about this.) Either rename them (mv /dev/ttyA0 /dev/ttyd0) or make additional nodes (mknod /dev/ttyd0 c MAJ min). I hope this helps. Fred.