david@pyr.gatech.EDU (David Brown) (01/21/89)
I'm trying to set up UUCP to use a Hayes 2400 baud modem. It works using a Hayes 1200, but I get problems when I use the 2400. I've got a Vax 11/750 running (mostly vanilla) 4.3BSD. The files are set up as follows: L.sys: remote Any ACU 2400 4045555555 "" "BREAK" ogin:--ogin: mylogin ssword: mypswd L-devices: ACU ttyd4 unused 2400 hayes2400tone ACU ttyd4 unused 2400 hayes2400pulse And here's the output: >>> uucico -r1 -x9 -sremote root remote (1/20-10:44-16457) DEBUG (Local Enabled) finds (remote) called getto: call no. 555555555 for sys remote Using ACU to call Dialing 555555555 Using hayes2400tone dc - /dev/ttyd4 Resetting fd = 6 character read = 0x0 character read = 0xFFFFFFDA character read = 0xFFFFFFFF character read = 0x7F character read = 0xFFFFFF90 character read = 0xFFFFFFA1 character read = 0x0 /* does this line 9 times */ character read = 0x20 root remote (1/20-10:44-16457) FAILED (HSM Spurious OK response) /*does last 16 lines twice*/ character read = 0x0 character read = 0xFFFFFFDA character read = 0xFFFFFFFF character read = 0x7F character read = 0xFFFFFF90 root remote (1/20-10:46-16457) Modem Hung (/dev/ttyd4) Hanging up fd = 6 >>> If you have any suggestions, please e-mail me. Thanks, David Brown ---------------------------------------------------------------------------- David Brown Armstrong State College, Savannah, Georgia uucp: ...!{akgua,allegra,amd,hplabs,uunet,seismo,ut-ngp}!gatech!gitpyr!david ARPA: david@pyr.gatech.edu