ti@Altos.COM (Ti Kan) (05/31/89)
In article <19764@adm.BRL.MIL> C463435@umcvmb.missouri.edu (Don Ingli) writes: > >My problem: I can't get shl to work correctly. here is a log of the >error message and a listing of my /dev/sxt*. > >here tis the log.. >don:> shl >no control channels available (errno=6) You are probably running a kernel that does not have the SXT module linked in. Look at your /usr/sys/system file and if there is no line that resembles INCLUDE: SXT in it, you must edit that file, add the line, and re-configure the kernel by doing a "make" in /usr/sys. -Ti -- -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- Ti Kan vorsprung durch technik! UUCP: ...ucbvax!sun!altos86!ti -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-