Howeird@cup.portal.com (Howard Gary Stateman) (12/06/88)
Does anyone know of HP-UX software that will allow the HP9000 to use the TIFF file input from an HP Scanjet scanner? We have a PC and can convert TIFF to GEM or PC Paintbrush format, if necessary, but would like to be able to scan directly into HP-UX.
vic@zen.UUCP (Victor Gavin) (12/08/88)
In article <12173@cup.portal.com> Howeird@cup.portal.com (Howard Gary Stateman) writes: >Does anyone know of HP-UX software that will allow the HP9000 to >use the TIFF file input from an HP Scanjet scanner? We have >a PC and can convert TIFF to GEM or PC Paintbrush format, if >necessary, but would like to be able to scan directly into >HP-UX. Ha! HP does it again.... This is something I gave up on a long time ago. The ScanJet uses a screwed up Centronics interface which allows data transfer in *BOTH* directions and thus needs a special PC interface to talk to it. There is almost no way to connect the scanner to anything except a PC or a MacIntosh. Why don't the different divisions talk to each other? This was a peripheral that should have been using the HP-IB interface ("What, use something that's a standard? Nah, lets botch it"). What are HP going to do when Desktop Publishing gets going on the workstation market? Do HP care? vic -- Victor Gavin Zengrange Limited vic@zen.co.uk Greenfield Road ..!mcvax!ukc!zen.co.uk!vic Leeds LS9 8DB +44 532 489048 England
Howeird@cup.portal.com (Howard Gary Stateman) (12/13/88)
HP-IB would not have been an intelligent interface to choose for the HP Scanjet, since it will not work in a non-HP PC or a Mac, the two largest users of DTP.
vic@zen.UUCP (Victor Gavin) (12/14/88)
In article <12538@cup.portal.com> Howeird@cup.portal.com (Howard Gary Stateman) writes: >HP-IB would not have been an intelligent interface to choose >for the HP Scanjet, since it will not work in a non-HP >PC or a Mac, the two largest users of DTP. Thank you. HP had to provide *special* interface boards (and driver software) for each of these machines so that they could communicate with the scanner. My point is that if they had used HP-IB (IEEE-488) instead, every one who own an HP computer with HP-IB could have used the scanner as well. vic
kworrell@mcdurb.Urbana.Gould.COM (12/20/88)
Does anybody have any inforamtion as to how one controls the ScanJet? How about a HP part number for the technical manual? Appreciate it. ------------------------------------------------------------------------ Kurt J. Worrell USEnet1: uunet!uiucuxc!urbsdc!kworrell Motorola Inc ARPAnet: kworrell@xenurus.Gould.Com **** Standard Disclaimer *** BELLnet: (217) 384-8500, x740
irf@kuling.UUCP (Bo Thide) (12/27/88)
In article <1460@zen.UUCP> vic@zen.UUCP (Victor Gavin) writes: >HP does it again.... > >This is something I gave up on a long time ago. The ScanJet uses a screwed up >Centronics interface which allows data transfer in *BOTH* directions and thus >needs a special PC interface to talk to it. There is almost no way to connect >the scanner to anything except a PC or a MacIntosh. > >Why don't the different divisions talk to each other? This was a peripheral >that should have been using the HP-IB interface ("What, use something that's a >standard? Nah, lets botch it"). > >What are HP going to do when Desktop Publishing gets going on the workstation >market? Do HP care? Apparently you didn't read the May, 1988 issue of "The Communciator", the journal from the HP Tech Group that you receive free of charge as an HP computer customer. On p. 17 in that issue there is a neat article called "HP 9190A ScanJet on Series 300 HP-UX (Turn Your Workstation into a Copier", by Bob Niland, HP. There you have your description -- hardware, C program listing and all! The idea is to get an ISA EX-7032 DIO-I Centronics interface, do a bit of rewiring (thoroughly described) and then use your ScanJet on the 300! We have a ScanJet hooked up to a PC and I have a DIO slot left so I might try it. If so, I'll come back with reports to this newsgroup. I agree that I would have preferred an HP-IB, but then the PC market would have been closed.... (Marketing, marketing ...) -Bo ^ Bo Thide'-------------------------------------------------------------- | | Swedish Institute of Space Physics, S-755 91 Uppsala, Sweden |I| [In Swedish: Institutet f|r RymdFysik, Uppsalaavdelningen (IRFU)] |R| Phone: (+46) 18-403000. Telex: 76036 (IRFUPP S). Fax: (+46) 18-403100 /|F|\ INTERNET: bt@irfu.se UUCP: ...!enea!kuling!irfu!bt IP: 192.36.174.1 ~~U~~ -----------------------------------------------------------------sm5dfw