sweh@tharr.UUCP (Stephen Harris) (12/10/90)
In fact, programming the Function keys on any VT series machine (even a VT100
if possible).
The keys I want to program are the ones marked F1->F14,HELP,DO,f17->F20 on
the top row (not the numeric/application keypad).
The 420 manual says use DCS Pc ; Pl | Ky1/Sy1 ST
where Ky1 is from a table and St1 is a list of Hex codes.
I have tried echoing
<ESC>P0;1|29/40<ESC>\
but this doesn't program to DO key as I expected.
I have sent off for the 420 programmers manual but need the answer to this
question urgently.
Can anyone help?
Thanks
--
Stephen Harris
Disclaimer: me have an opinion? | Email: ..!ukc!axion!tharr!sweh
What an idea! | sweh%tharr.uucp@uk.co.bt.axion
Wanted: humour transplant | tharr!sweh@uk.ac.ukc
<-- tharr *free* public access to Usenet in the UK 0234 261804 -->