pcb@cacs.usl.edu (Peter C. Bahrs) (12/15/90)
I have an old(er) NEC Multisync monitor that I got with my ega card 2.5 years ago. It will go to 800x600 or so resolution. Is there an adapter or something that I can change the ends of the NEC video card cable so that it will connect to a VGA video card? /*----------- Thanks in advance... --------------------------------------+ | Peter C. Bahrs | | The USL-NASA Project | | Center For Advanced Computer Studies INET: pcb@swamp.cacs.usl.edu | | 2 Rex Street pcb@gator.cacs.usl.edu | | pcb@basin.cacs.usl.edu | | University of Southwestern Louisiana ...!uunet!dalsqnt!gator!pcb | | Lafayette, LA 70504 | +-----------------------------------------------------------------------*/
kevinr@malta.sbi.com (Kevin Redden) (12/18/90)
In article <20766@rouge.usl.edu>, pcb@cacs.usl.edu (Peter C. Bahrs) writes: > I have an old(er) NEC Multisync monitor that I got with my ega card > 2.5 years ago. It will go to 800x600 or so resolution. > > Is there an adapter or something that I can change the ends of the NEC > video card cable so that it will connect to a VGA video card? The adapter is part GENDER-VGA ($4.95) available from JDR Microdevices (800-538-5000). Remember to reset the monitor to take analog input when connecting to the VGA board. Kevin Redden Salomon Technology Services