pdbourke@ccu1.aukuni.ac.nz (Bourke) (03/05/91)
I urgently require some comments from people in the CAD industry
regarding file interchange formats, which ones are being used, which
ones are successful, etc
Information along the following lines would be most useful:
1) Name of file format (eg: DXF, IGES, PICT...)
2) Machine it is being used on (eg: IBM, SUn, Mac...)
3) Software it is used to transfer to/from
4) 2D or 3D data being transfered
5) What problems have been encountered
6) General comments
Thanks in advance, please forward replies to pdbourke@ccu1.aukuni.ac.nz
====================================================================
From: pdbourke@ccu1.aukuni.ac.nz
AppleLink: NZ0028
Postage: P.D.Bourke
Architecture School, Auckland University
Private Bag
Auckland
New Zealand
PH: NZ (09) 737 999 x7367
Fax: NZ (09) 366 4665
====================================================================