daniel@vmucnam.UUCP (02/12/87)
we have an emulex cs11-u2 on a750 under 4.2BSD and suffer the following problem: - since a crash due to a power-failure (losses: unibus-extension, deuna) we los -t 16 lines (ttyho-hf) controlled by this cs11 excepted one ttyha (on which ini -t start a getty process)!! - nothing was voluntarily changed by us in the system-tables (ttys,...) - under a VMS-test sytem with emulex driver all lines work fine ,permit login... -here is an example of the pstat command: 1 cons # RAW CAN OUT MODE ADDR DEL COL STATE PGRP DISC 0 0 0 0 40d2 0 0 0 OC H 41 16 dz lines 0 0 0 0 c8 8003703c 0 0 C 0 1 0 0 0 20 80037050 0 -42 C 0 2 0 0 0540500d8 80037064 0 0 OC H 5734 ntty 3 0 0 0 c8 80037078 0 0 W 0 4 0 0 0 40f0 8003708c 0 85 OC H 791 5 0 0 0 c8 800370a0 0 0 W 0 6 0 0 0540500e0 800370b4 0 -60 OC H 3878 ntty 7 0 0 0 c8 800370c8 0 0 W 0 8 0 0 0 c8 800370dc 0 0 W 0 9 0 0 0540500d8 800370f0 0 2 OC H 4328 ntty 10 0 0 0 40f0 80037104 0 43 OC H 612 11 0 0 0 40f0 80037118 0 96 OC H 5527 12 0 0 0 40f0 8003712c 0 80 OC H 758 13 0 0 0 40f0 80037140 0 39 OC H 115 14 0 0 0 40f0 80037154 0 42 OC H 787 15 0 0 0540500d8 80037168 0 4 OC H 117 ntty 16 dh lines 0 0 0 0 c8 8031e110 0 0 W 0 1 0 0 0 c8 8031e110 0 0 W 0 2 0 0 0 c8 8031e110 0 0 W 0 3 0 0 0 c8 8031e110 0 0 W 0 4 0 0 0 c8 8031e110 0 0 W 0 5 0 0 0 c8 8031e110 0 0 W 0 6 0 0 0 c8 8031e110 0 0 W 0 7 0 0 0 c8 8031e110 0 0 W 0 8 0 0 0 c8 8031e110 0 0 W 0 9 0 0 0 c8 8031e110 0 0 W 0 10 0 0 0540540f0 8031e110 0 41 OC H 128 11 0 0 0 c8 8031e110 0 0 0 12 0 0 0 0 0 0 0 0 13 0 0 0 0 0 0 0 0 14 0 0 0 c8 8031e110 0 0 W 0 15 0 0 0 c8 8031e110 0 0 W 0 32 pty lines 0 0 0 0 0 0 0 0 0 it shows that all ttyh lines share the same address; is this normal ? it seems that "init" sees one and only one line (ttyha: why this one ?) among 16 of which 9 are interactive (ttys). any idea or explanation will be welcome !!!!!!!!! thanks in advance