jeb@gamma.UUCP (03/27/87)
We have just put up ULTRIX on a VAX 8650 and are using som TU78's which were connected to two other machines. We have one master drive by itself then we have an additional master drive with two slaves for a total of 4 drives. Listed below is the part of the configuration file that pertain to the tapes: controller mba0 at nexus ? master mt0 at mba0 drive 0 tape mu0 at mt0 slave 0 master mt1 at mba0 drive 1 tape mu1 at mt1 slave 0 tape mu2 at mt1 slave 1 tape mu3 at mt1 slave 2 At boot time the system lists out the correct configuration according to the above list. Now our problem is that when we try to access them we can only access the first drive as /dev/rmt8 and drive 3 (the second drive on mt1) as /dev/rmt9. Please send responses via e-mail. Thanx John Berry Bellcore