cormac@rtech.UUCP (04/23/87)
Can anyone advise me on how to set up my Ultrix system such that
a vt220 terminal can understand the getty sent by the system?
It works fine when the vt220 is setup like a vt100, but we want
to use the keypad under VMS, and have to change terminal setup to
use unix. If you can advise please respond via e-mail, I don't
always have time to read this group. Thanks much!
Cormac
Cormac Burke
Relational Technology Inc. "The Wheel is turnin',
{amdahl, sun}!\ can't slow it down,
rtech!cormac can't let go,
ucbvax!mtxinu!/ and ya can't hold on..."twaites@sunburn.uucp (Greg Twaites) (04/27/87)
Another vt220/Ultrix question: It seems as though Ultrix wants to speak 7-bit Even-parity. This is just fine and dandy--I set my vt220 up as 7E. However, whenever I need to get to the VAX monitor (MicroVAX-II) level, the vax wants 8 bit No-parity. So I have to reset the vt200, start the reboot, and switch the terminal back to 7 bit Even. Anybody have any ideas how i can avoid this constant parity switching? thanks Greg Twaites SICOM Inc Scottsdale, AZ