neese@adaptex.UUCP (05/01/90)
>/* ---------- "Info on Adptec 1542A scsi adapter" ---------- */ >I am looking for some technical documentation on Adaptec AHA-1542A >scsi adapter. I do have installation guide but that does not have >enough information to enable writing a driver for it on UNIX. I >would appreciate if somebody has some information on this board >and is willing to pass on to me. You can download the ascii user/tech ref. file for the 154xA adapter off of adaptex or our CA. BBS (408)945-7727. To get the file off of adaptex: ------------------------------------------------------------------------------- Put the following line in your /usr/lib/uucp/Systems file. adaptex Any ACU BAUD 18174886893 -\d\d\d-gin:-BREAK\d\d\d-gin:-BREAK\d\d\d-gin: suucp NOTE: The word BAUD can be replaced with either 9600, 2400, or 1200. You can snarf the following compressed binary files via uucp. 1540CPU.LIST.Z GRDRIVE.EXE.Z SCSICNTL.EXE.Z 1540DRV.LIST.Z GREAD.EXE.Z SCSIHA.SYS.Z 1540USR.MAN.Z GWRITE.EXE.Z SETSCSI.EXE.Z sco.patches.Z sds3.desc.Z LIST setscsi.doc.Z @0F1F.ADF.Z README inq.Z scsicntl.doc.Z GETDEVS.EXE.Z SCSI.EXE.Z list Use the following command: uucp adaptex!~/filename /usr/spool/uucppublic/filename Replace 'filename' with the appropriate name of the file that you want. To those who only want the mode sense fiddler, it is the SCSICNTL.EXE file. No matter which files you snarf, always get the README file. ------------------------------------------------------------------------------- Roy Neese Adaptec Central Field Applications Engineer UUCP @ {texbell,attctc}!cpe!adaptex!neese merch!adaptex!neese uunet!swbatl!texbell!merch!adaptex!neese