voorst@wybbs.mi.org (Dale Van Voorst) (06/08/90)
I have a clone 286 system running SCO-Xenix 2.3.2 that is getting a
trap error every few days. I have seen various different trap numbers
occuring on other machines (i.e. Altos) and have never been able to get
any good answer as to what causes which errors.--sometimes they blame
software, sometimes hardware.
Does anyone have a list of what these trap numbers mean and what the
causes commonly are?
Any input on this topic would be appreciated.
The specific message I get is as follows: (the registers vary somewhat)
Trap 000D in system
ax=0040 bx=F9C6 cx=0000 dx=0110 si=0018 di=03D4
bp=0392 fl=0286 uds=0018 ex=0110
pc=0060:3B93 ksp=0378
prtrap: PANIC: general protection trap
Safe to power off
-or-
Press any key to reboot
Thanks for any help.
Dale Van Voorst
--
Dale Van Voorst
voorst@wybbs.mi.org
..sharkey.cc.umich.edu!wybbs!voorst