TABAKIN@vms.cis.pitt.edu (08/04/90)
Dear Glenn: Concerning Hp laserjet and a Decstation, I have a laserjet iii running off a Decstation3100 in plain hp mode and also with a postscript cartridge. The info was provided, after several attempts , by DEC. The file plain_lj.c plus the printcap file does the trick. Hope it helps. frank --------------------plain)lj.c----------------------------------------- /* xtab - filter out tabs; replace with correct number of spaces */ #include <stdio.h> #define D_TABWIDTH 8 /* default tab width */ int tabwidth = D_TABWIDTH; #define nexttab(x) ((x+tabwidth)-(x%tabwidth)) /* calculate next tab position */ int main(argc, argv) int argc; char *argv[]; { register int c, /* incoming char */ dest, /* destination column number for tab logic */ col; /* next column to print into */ char *cp, *tcp; fputs("\033E\033&k2G\033&166p2e7.6c66F",stdout); col = 0; while ((c=getchar()) != EOF) { if(c< ' ') { if (c == '\t') { for (dest = nexttab(col) ; col < dest; col++) putchar(' '); continue; } else if (( c == '\n') || (c == '\r')) { putchar(c); col = 0; continue; } else if (c == '\b') { if (col > 0) { putchar('\b'); col--; } continue; } } putchar(c); col++; }/* while */ fputs("\033E",stdout); } ------------------------------------------------------------ ------------------printcap------------------------------------------ # set up for printing on hplaseriii in hpl mode lpj|lp1|lj3|hp:\ :af=/usr/adm/lp1acct:\ :br#9600:\ :fc#0177476:\ :ff=:\ ff=\033E:\ :fs#0000301:\ :lf=/usr/adm/lp1err:\ :lp=/dev/tty01:\ :of=/usr/local/plain_lj:\ :sh:\ :sb:\ :sd=/usr/spool/lpd1:\ :xc#077737:\ :xs#000040: ------------------------------------------------------------