aronb@gkcl.ists.ca (Aron Burns) (11/27/90)
We're trying to connect to machines via uucp and having some problems. a) 'accnt', Xenix 2.3.2, Hayes V-series 2400 b) 'WORK_SWM', SCO UNIX 3.2 ( actually odt ), Telebit t2500 set for 2400 accnt has succesfully uucp'd files from SCO, anomally, my PC ( under uupc ), and several other systems. WORK_SWM is a new system ( so I suspect it ). with uutry -x9 accnt from WORK_SWM, the connection starts up, login goes ok, a request is made that looks like this Request: WORK_SW!D.WORK_3fff845 --> accnt!D.WORK_3fff845 (mmdf) and shortly after this happens PROCESS: msg - SY SNDFILE: send 37777777621 send 37777777631 send 37777777641 send 37777777651 send 37777777761 send 37777777771 -> 317 / 0.100 secs, 3710 bytes/sec rmesg - 'C' alarm 1 send 37777777621 pkgetpack: Connodata=1 rec h->cntl 41 pkcntl: RR/RJ: Connodata=1 send 37777777631 state - [O.K.] (10) alarm 2 at which point it appears to try again, with alarm x increasing until x=8, then it shuts down the connection. Any thoughts? WORK_SWM is successfully downloading sls's from SCO, so uucp seems ok. I'm sure the config is right ( otherwise it wouldn't get past login ), and don't know where to go from here. On a general note, what do I read to understand to output from uutry -x9? TFM doesn't go into detail, nor do the nutshell handbooks. Aaron Burns "Nothing I say on the net is binding aronb@gkcl.ists.ca to our corporation" Toronto, Ontario "Life is a forge, and the purest metal (416)392-4310 comes from the hottest fire"