cdl@chiton.ucsd.edu (Carl Lowenstein) (12/08/90)
I don't know if this is a NeXT-specific problem, or more wide-spread.
When using tip(1) to connect to a modem through /dev/cua, I
would like to set the serial output format to 8 bits no parity.
A tour through the manuals finds tty(4) saying:
"output parity is usually even." No clues there.
stty(1) can set acceptance of input data to be odd, even, or both,
but does not affect output.
--
carl lowenstein marine physical lab u.c. san diego
{decvax|ucbvax} !ucsd!mpl!cdl cdl@mpl.ucsd.edu
clowenstein@ucsd.edu