nigel@cnw01.storesys.coles.oz.au (Nigel Harwood) (03/26/91)
Please excuse my lack of knowledge in describing this problem but I hope someone can understand what I'm on about. I have system 1 connected into our ethernet through a DEC delni in location1. I have systems 2-4 connected into our ethernet through another DEC delni in location2. Systems 2-4 are up and running and know about each others addresses. On starting up TCP on system 1 it cannot resolve the addresses for systems 2-4. If I tell it the address then it can communicate with them. In addition systems 2-4 can communicate with system 1 from the start. Now, if I disconnect system 1 from location1 and plug it into location2 the whole problem goes away. System 1 can suddenly resolve everyone's addresses and all is well. Can anyone shed any light on what is happening here ? Regards -- <<<<<<<<<<<<<<<<<<<<<<<<< Nigel Harwood >>>>>>>>>>>>>>>>>>>>>>>>>>> << Post: Coles Myer Ltd, PO Box 2000 Tooronga 3146, Australia >> << Phone: +61 3 829 6090 E-mail: nigel@cnw01.storesys.coles.oz.au >> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>