amir@taux01.nsc.com (Amir J. Katz (Xpert)) (04/08/91)
I have pulled pcomm 1.2 from uunet archives, compiled it for my system
(after tweaking the config.h and Makefile).
It seems to work (all menus come up, etc.), but when it comes to dialing, nothing happens.
'tip' works fine, and so is uucp.
Configuration: - SparcStation IPC w/SunOS 4.1.1
- Practical Peripherals PM2400SA modem (connected to serial port A)
Any clues to what's happenning? Which modules to start debugging, etc.
Please e-mail to me, using the address below.
-- Thanks in advance,
--
Amir J. Katz, System Manager
Internet: amir@taux01.nsc.com
UUCP: {decwrl,uunet,...}!nsc!taux01!amir
Phone: +972 52-570713
Fax: +972 52-570719
Snail-mail: Amir J. Katz, Silvaco Israel Ltd.
19 Maskit St., Herzelia, Israel 46733