weis@netmbx.UUCP (Dietmar Weis) (05/16/91)
I've recently set up a uucp connection between an SCO Unix 3.2 Box and a Microvax running Ultrix 3.1. After successfully chatting and agreeing their roles etc. the master (SCO-Box) starts sending the file. But after having send exactly 1 KB one of them won't continue. The master sends 10 alarms, gets then a timeout and aborts. The LOGFILE on the Master (SCO Unix) says: SUCCEEDED (call to dc10) OK (startup tty2A) REQUEST (localpc!path --> remotevax!path) FAILED (conversation complete) The slave MVAX says: incoming call on /dev/tty06 OK (startup) REQUESTED (S ...filenames...) FAILED (conversation complete) O'Reilly says, this usually means, the other side went down, the line hung up or the program aborted. The first two reasons are obviously not true, the third one is :-(. I've also included some stuff from the uucico debug-output, (where the lines of successfully establishing the connection are omitted), perhaps is there a kind soul, who would like to have a look on it and "decode" it. Pls email. Thank you very much. Dietmar --------------- cryptic uucico debug output follows ---------------------- *** the problem is at the end, *** but I didn't know whether the stuff before that *** is important or not imsg >^M^J^PShere^@Login Successful: System=o dc10 omsg "Sdwpc -Q0 -x9" imsg >^PROK^@msg-ROK Rmtname dc10, Role MASTER, Ifn - 5, Loginuser - uucp rmesg - 'P' imsg >^PPgf^@got Pgf wmesg 'U'g omsg "Ug" send 73 pkgetpack: Connodata=1 rec h->cntl 73 send 61 state - [INIT code a] (1) pkgetpack: Connodata=2 rec h->cntl 61 send 53 state - [INIT code a]&[INIT code b] (3) pkgetpack: Connodata=3 rec h->cntl 53 state - [O.K.] (10) Proto started g *** TOP *** - role=1, setline - X gtwvec: dir /usr/spool/uucp/dc10 insert(C.dc10N2769) insert C.dc10N2769 at 0 return - 8 Wfile - /usr/spool/uucp/dc10/C.dc10N2769,Jobid = dc10N2769 Request: dwpc!/usr/news/comp/unix/ultrix/tk50 --> dc10!~/receive/weis/dwpc/ (didi) setline - S wrktype - S wmesg 'S' /usr/news/comp/unix/ultrix/tk50 ~/receive/weis/dwpc/ didi -dcmn D.dc102769909 660 weis send 37777777610 send 37777777620 rmesg - 'S' pkgetpack: Connodata=4 rec h->cntl 41 pkcntl: RR/RJ: Connodata=0 state - [O.K.] (10) pkgetpack: Connodata=1 rec h->cntl 42 pkcntl: RR/RJ: Connodata=0 state - [O.K.] (10) pkgetpack: Connodata=1 rec h->cntl 37777777612 send 41 got SY PROCESS: msg - SY SNDFILE: send 37777777631 send 37777777641 send 37777777651 pkgetpack: Connodata=1 rec h->cntl 43 pkcntl: RR/RJ: Connodata=0 state - [O.K.] (10) send 37777777661 pkgetpack: Connodata=1 rec h->cntl 44 pkcntl: RR/RJ: Connodata=0 state - [O.K.] (10) send 37777777671 [...deleted, about 15 times again ] then ... pkgetpack: Connodata=1 rec h->cntl 43 pkcntl: RR/RJ: Connodata=1 state - [O.K.]&[Waiting] (1010) pkgetpack: Connodata=2 rec h->cntl 43 pkcntl: RR/RJ: Connodata=2 state - [O.K.]&[Waiting] (1010) alarm 1 send 37777777641 alarm 2 send 37777777641 alarm 3 send 37777777641 alarm 4 send 37777777641 alarm 5 send 37777777641 alarm 6 send 37777777641 alarm 7 send 37777777641 alarm 8 send 37777777641 alarm 9 send 37777777641 alarm 10 send 37777777641 tries = 10 send 37777777651 send 37777777661 send 10 send 10 cntrl - -1 omsg "OOOOOO" send OO 0,omsg "OOOOOO" imsg >^POOOOOO^@exit code -1 Conversation Complete: Status FAILED TM_cnt: 0 -- weis@netmbx.UUCP | Dietmar Weis DONOP CONSULT GmbH Voice: 030/884 28 54-0 | Uhlandstrasse 179/180 Fax: 030/882 55 29 | D - 1000 Berlin 12