nelson@sun.soe.clarkson.edu (Russ Nelson) (12/16/89)
I compiled popi using Turbo C. I used tc and popi.prj. When I run popi, I immediately get two malloc fails. This also happens if I use tcc and the Makefile. Does this happen to anyone else? -russ -- --russ (nelson@clutx [.bitnet | .clarkson.edu]) Live up to the light thou hast, and more will be granted thee. A recession now appears more than 2 years away -- John D. Mathon, 4 Oct 1989. I think killing is value-neutral in and of itself. -- Gary Strand, 8 Nov 1989. Liberals run this country, by and large. -- Clayton Cramer, 20 Nov 1989. Shut up and mind your Canadian business, you meddlesome foreigner. -- TK, 23 N.
stephenf@softway.oz (Stephen Frede) (12/18/89)
nelson@sun.soe.clarkson.edu (Russ Nelson) writes: >I compiled popi using Turbo C. I used tc and popi.prj. When I run popi, >I immediately get two malloc fails. This also happens if I use tcc and >the Makefile. On a PC, run it with "popi -x128 -y128". This should be the default on a PC at the moment, or better still it should work with the existing default of 512x512. All these things and more will come in due time. On a PC, I recommend using a VGA. Support for other adapters will improve with time. Of course, any and all suggestions and code will be gratefully received. Regards, - Stephen Frede Softway Pty Ltd, P.O. Box 305, Strawberry Hills, NSW 2012, AUSTRALIA Phone: +61 2 698 2322; Fax: +61 2 699 9174; Telex: AA27987 ACSnet: stephenf@softway.oz UUCP: ...!uunet!softway.oz!stephenf