MAJI@SLACVM.SLAC.STANFORD.EDU (Ji Ma) (02/10/91)
Well, I saw some one have difficult to run TI to a monitor and a audio. Here is my method: The DIN5 port on the back of TI99/4A console has following assignment: (clockwise) #1 --- +12V #2 --- composite vedio #3 --- vedio ground #4 --- system ground #5 --- audio out So one can make his own cable to hook up TI and a monitor and audio amplifier easily. One needs to be careful not to short the +12V. Other lines are more or less harmless when connect wrong. Hope this helps. I also modified some joysticks and have the assignment. if enough people interested, I will post it here some time. Maji