wrd@tekigm2.UUCP (Bill Dippert) (12/20/86)
Some time ago, there was an article in either ANTIC or A.N.A.L.O.G. magazines that told how to use an Atari 800/XL/XE as a source of titles for VCR tapes. I have tried to connect my computer and VCR together to do this and cannot seem to find the proper connection scheme. Does anyone either remember which issue of which magazine that this appeared in or does anyone know how to do this? I have tried connecting computer to switchbox on games with VCR without success, similarly have tried inputing computer to VCR signal in RCA jack, but again no success. I have VCR set up to use ch 4 and computer to use ch 3, figuring that I could then set VCR to channel 3 and receive the signal from the computer, but again no success. I only seem to be able to use the VCR or the computer, but not both together. (Both work fine by themselves with no changes in wiring and with the other device shutoff.) Thanks in advance --Bill Dippert-- tektronix!tekigm2!wrd This site will be down part of the time during Christmas, so any messages and replies may be delayed. (From 24 Dec to 4 Jan)