david1@mhuxu.UUCP (Rick Nelson) (08/31/87)
My 1050 disk drive died recently and I'm wondering where to get schematics. The power on/off LED comes on, but nothing happens after that. I put a disk in and nothing. I took it apart and nothing wrong was obvious visually. I measured the voltage from Vdd-Gnd on various dips, but got nothing. I'm wondering if the power supply died. Have any info? Rick Nelson mhuxu!david1 Bell Labs, Reading, Pa.
store2@ihlpf.UUCP (09/01/87)
In article <6738@mhuxu.UUCP>, david1@mhuxu.UUCP (Rick Nelson) writes: > > My 1050 disk drive died recently and I'm wondering where to get schematics. One source of parts and schematics is American Techna-Vision. They have the SAMS service manual for the 1050 for $19.50. They have IC's, circuit pack assemblies and complete drive mechanisms. Their address is: American Techna-Vision 15338 Inverness St. San Leandro, CA 94579 1-800-551-9995 or (415)-352-3787 They accept credit cards. They also do repair if you can't figure out the problem. Service rate for the 1050 is $85. Hope this helps... Kit Kimes AT&T--Information Systems Labs ...ihnp4!iwvae!kimes