jimomura@lsuc.UUCP (07/24/87)
I've had my system QT-20X system for a few months now and I still have a lot of work to do porting software. So far I haven't had much luck finding anyone who wants to help out. If you want to take a look around on my computer, I'm currently allowing access on my spare line as follows: (416) 652-3480 Connect is 1200 baud only (Sometimes by special request I set it up at 300 baud only--there is no automatic speed detection however, so it's either one or the other). login: guest (no password). All proprietary or private files are protected, so feel free to wander around at will. The general purpose text editor is MicroEMACS (Conway/ Lawrence) which is called 'umacs'. There is a 'build' command for creation of text files without editing. There is also MicroGNU Emacs as 'mg'. The default terminal support is VT-100. There is no 'man' and *very little online help*. Note that if you leave me a phone number (either by e-mail or on my answering machine or on the computer) I'll try to return calls to answer questions and discuss further access. I'm currently working on a port of 'elm2' which is taking a fair bit of time. I could use advice from someone familiar with Unix (since the biggest problem I have is finding out what's happening in Unix calls that I don't know) or a hot C expert. If you have previous experience in OS-9 that might help too, but it's probably not necessary. Cheers! -- Jim O. -- Jim Omura, 2A King George's Drive, Toronto, (416) 652-3880 ihnp4!utzoo!lsuc!jimomura Byte Information eXchange: jimomura