miler@cscadm.ncsu.edu (George Miler) (05/25/90)
I am currently working on a project involving hardware level
programming on a SAGE IV minicomputer. I have several manuals, that
describe where the hardware addresses are located, but nothing to the
effect telling how to program them. Currently I am attempting to
program the floppy disk controller and have the spec sheets on the
controller, but not how it is wired to the microprocessor. What I need
is any leads as to where I may find such information. ROM listings and
BIOS listings would help troumendously, as would documentation on the
SAGE <-> device interfaces. I also need to know how interrupts from
external devices are wired to the 68000 autovectors. Any help would be
greatly appericated!
George Miler
miler@cscadm.ncsu.edu
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
George B. Miler North Carolina State University
miler@cscadm.ncsu.edu {decvax, gatech}!mcnc!ncsuvx!cscadm!miler
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=