mikael@sm.luth.se (Mikael Eriksson) (05/05/88)
A while ago I asked for information on electronic design and simulation programs that works on the MacII. I promised a summary so here it is. (A little late unfortunatly.) From @enea.se:nagel@ics.uci.edu Sat Mar 26 17:16:12 1988 At UCI, there are some undergraduates that just completed version 1.0 of a program called Digital Magic. It is a very good circuit simulator, but still needs some improvements (like timing diagrams and saving subcircuits). However, it does work on a Mac II and is very good in spite of the things that are missing. For more information, please contact one of the authors: Sailesh Ranchod sranchod%bonnie@ics.uci.edu Hope this helps! Mark Nagel nagel@ics.uci.edu ------------------------------------------------------------------------ [ Digital Magic was also mentioned by tbruck@orion.cf.uci.edu who gave two other addresses to reach the authors on: mac@ics.uci.edu, standish@ics.uci.edu I hawe written and asked about Digital Magic but I have not gotten any answers.] From: Ray Curry <curry@nsc.nsc.com> I have used Logic Works and Design Works (a newer and more advanced version from Capilano (Canada) on a Plus and just recently on a Mac II. I find it satisfactory and it allows subcircuits. Subcircuits are how complex devices are added to the library. Recently they associated themselves with Douglas Engineering in the LA area. Douglas has a board layout program that now takes the outputs from Logic Works or Design Works and produces artwork. Douglas will take a floppy and two weeks later send you a board. Both Douglas and Capilano are selling complete packages. I haven't used the board layout package yet since its pretty expensive. --------------------------------------------------------------------- Mikael, This may not be of much help, but there is a company called Bishop Graphics (location in Canoga Park) that put out a program called Quick Circuit. I have a demo disk here, but I think it is an unathorized copy, its not mine. It won't let me do much but it will do PCBoard layout design. I know they have other material published, so you may want to look into it. The phone number is 1-800-222-5808 (Canoga Park) They do send out catalogs. I should have one in hand this week. Steve Gerber Purdue Univ. Computing Center - Micro Repair 317/494-1787 ext 242 ARPA: ae3@j.cc.purdue.edu UUCP: j.cc.purdue.edu!ae3 FidoNet: Opus 201/1 COMPUSERVE: 72467,3145 --------------------------------------------------------------- From: Ken Hillen <kenh@pogo.gpid.tek.com> I use DesignWorks by: Capilano Computing, 501 - 1168 Hamilton St., Vancouver, B.C., Canada, V6B 2S2 (604) 669-6343 This package does full schematic capture as well as simulation. It has a device librarian which allows you to put a circuit into a reusable component. They also make a PAL compiler which produces JED files (for programming devices) as well as an input file to DesignWorks. DesignWorks creates a netlist which is directly compatable with Douglas Electronic's circuit board design tools. It will also generate a parts list. They also have available large libraries of 'off the shelf' components. DesignWorks runs on the Mac II, runs under multifinder (simulates in the background) and supports color. I have been very satisfied with their products and service. Ken Hillen ------------------------------------------------------------- -- Mikael Eriksson (mikael@sm.luth.se) or ...enea!sm.luth.se!mikael ......... From the US ..!uunet!enea!sm.luth.se!mikael Give me source or give me death...