jim@trsvax.UUCP (12/17/88)
Use the appliance module, not the 'light' module. The dimming/switching circuitry can not properly feed the flourescent ballast for dimming. James T. Wyatt UUCP:decvax!microsoft!trsvax!rwsys!jim (817)451-5719
jim@mnetor.UUCP (Jim Stewart) (12/21/88)
Speaking of the X10 system, I have misplaced the article posted
a while ago which described how to get the X10 signal from one
side of the 110V breaker panel to the other side.
I recall one solution was to go into the dryer outlet and connect
the two hot sides with a large resistor, a small fuse, and a small
capacitor. But I am not about to going experimenting!
Can someone help me out? tnx
--
Jim Stewart, VE3SRJ
UUCP: {utzoo,uunet}!mnetor!jim
ARPA: jim%mnetor.uucp@uunet.uu.net
BELL: (416)475-8980