dc@hpmtlx.HP.COM ($Dave_Crook@hpmtldc) (07/11/89)
How is the electrical signal taken out of the vcr rotating head? Is is inductive, capacitive, inductive, slip rings etc? Also, how is the audio taken off the tape? I can understand the audio coming off of a separate linear track. But someone told me that some machines put the audio down on the helical track. This would appear to me to be extremely difficult to achieve. It would be hard to get scan to scan closure without some audible artifact. Dave Crook dc@hpmtlx.hp.com
dspaced@lopez.UUCP (David S. Delongchamp) (07/13/89)
My machine uses slip rings and brushes to get the signal off the head unit. As far as audio, the heads look very similar to standard audio heads on cassette recorders. But then, I could be wrong. Hope this helps. -*- The above is in no way connected with my employer. They're too cheap to buy a modem! __/--------------------------------------------------------------------\__ | David S. Delongchamp ++ rutgers!mailrus!sharkey!lopez!dspaced | | At The Great White North BBS in Michigan's Beautiful Upper Peninsula | |__________________________Say Ya To Da UP, eh!____________________________| \__________________/