whack@nmsu.edu (Warren J Hack) (12/02/89)
I am new to this newsgroup and I am not an engineer, but I need some help. I am a grad student at a university who is working to upgrade some equipment. Unfortunately, we need to replace an A/D converter built about 15years ago with one that runs at a least 2.4 Mhz digital output. Another problem is that this board needs to be very stable as the incoming signal is on a line that may have to be more than 6" long and we can not afford to pick up any outside noise. If there is anyone out there who is familiar with the a A/D board with 5V output (to a PC counter/interface system we have), please let me know. E-mail is recommended as I can not always keep up with this newsgroup. I am working with some people who could build a board if suitable designs were available. Thanks in advance, Warren J. Hack Internet: whack@nmsu.edu Bitnet: g4949042 at nmsuvm1.BITNET Warren J. Hack Dept. of Astronomy, New Mexico State whack@nmsu.edu "I'm just a poor grad. student" Disclaimer: Only I am responsible for what I say (God help me).