rgs@bbt.UUCP (steinbeiser) (03/19/90)
More gear for Micromints BCC bus for sale. BCC11/Z8 Basic System Controller: This is a single board computer/controller based on the Zilog Z8671 single chip micro- controller. The board requires only a power supply and a termi- nal to develop applications using the onboard "tiny" BASIC/DEBUG interpreter in ROM. The board also contains 144 bytes of RAM, 32 I/O lines, serial terminal port (110-9600 bps), sockets for on- board RAM, ROM, or EPROM (up to 62K). Paid $139, sell for $50. BCC40D 8 Channel Optoisolated Expansion Board: For use with Mi- cromints BCC family of computer/controllers. The board is equipped for 4 DC inputs, and 4 DC outputs. The outputs are latched, LED indicator for each channel, each channel indepen- dently fused, screw terminal I/O connections. Paid $229, Sell for $50. BCC53 Expansion Board: Expands A BCC52 or BCC11 computer/controller with 62K bytes of RAM or EPROM (memory not included), 6 additional 8 bit bidirectional parallel ports (2, 8255 PIAs), and a 60 hz crystal controlled time base Paid $160 sell for $50. BCC55 Proto Board: For use with the Micromint BCC bus. This board has the BCC bus compatible edge connector, space for cir- cuit protyping, and all the bus demux circuitry required to in- terface your circuit the the BCC bus. Never used Paid $79 sell for $25. UPS11 Small System Power Supply: +5v @ 9A, +12v @ .3A, -5v @ .1A, has connector to plug directly into a BCC52 or BCC mother- board. Paid $19, Sell for $15. Poloroid Ultrasonic Range Finder: Transducer and TI sonar-ranging module can enable a computer or controller to measure distances from 1.33 to 35 feet. Documentation describes software and hardware interface to the BCC11 controller. Paid $50, sell for $20. If interested contact Bob Steinbeiser rgs@bbt.uucp (919 544-6850 x255)