touch@dsl.cis.upenn.edu (Joe Touch) (10/19/90)
The following information is relevant to the terminal emulation mode of the Radio Shack WP-2: keycodes interpreted: ESC H homes the cursor (to 0,0) ESC A cursor up ESC B cursor down ESC C cursor right ESC D cursor left (same as ^H) ESC Y x y cursor move to (x,y) i.e. move to 6,42 is ESC Y ^F * ESC J clear to end of screen *WHEN IN COLUMN 0 ONLY* (UNKNOWN function when cursor isn't in col 0) ESC K clear to end of line ESC ^^ (?) UNKNOWN FUNCTION (i.e. ^^ = code 30, decimal) ^H backspace (nondestructive, same as cursor left) ^J newline ^M carriage return (move cursor to column 0) ^T destructive tab keycodes sent ^H backspace ^T tab ^M return ^_ arrow down ^^ arrow up ^] arrow left ^\ arrow right To use the WP-2 with a UN*X system, make sure XON/XOFF flow control is set ON on the WP-2, and use the following termcap entry: # Joe Touch 10/14/90 Entry for Radio Shack WP-2 # cursor motion commands derived by experiments # jo|wp2|wp-2|Radio Shack WP-2:co#80:li#8:am:bs:\ :nd=\EC:ho=\EH:do=\EB:up=\EA:\ :cm=\EY%.%.:cd=\EJ:ce=\EK:cl=\EH\EJ:\ :kd=^_:kl=^]:kr=^\:ku=^^:\ :xo:pt:xt: *** If you found this useful, please send me some e-mail and let me know. Also, if you can figure out what the unknown functions are. Joe Touch PhD candidate Dept of Computer and Information Science University of Pennsylvania touch@cis.upenn.edu