kklw@mullian.ee.mu.OZ.AU (Kevin K L WONG) (11/06/90)
I am using the SEEQ ethernet chip set to build a ethernet port. From a logic analyzer, I found that when data is coming in (both CSN and RxD are active), the 8003 sometimes asserts the RxRDY but sometimes it doesn't which cause a severe packet loss. I set the Rx command register as 0x80 (match station address and broadcast) while Tx command register as 0x00, ie INT is not used at all. Do I forget to set up anything? Does anyone have experience on this chip set? Thanks in advance. _____________________________________________________________________________ | Kevin WONG | ACSnet : kklw@mullian.ee.mu.OZ | | Department of Elec Engineering | internet : kklw@mullian.ee.mu.OZ.AU | | University of Melbourne | uunet : uunet!munnari!mullian!kklw |