[sci.electronics] Icom charge currents?

wb8foz@mthvax.cs.miami.edu (David Lesher) (04/13/91)

I'm building my own version of the ICOM rapid/slow charger for my 02
batteries, such as BP-7's,-8's and others.

Does anyone know the charge currents that a BC-35 supplies for
various batteries?

(The sooner the better - I want to get this critter done for Dayton.)


-- 
A host is a host from coast to coast.....wb8foz@mthvax.cs.miami.edu 
& no one will talk to a host that's close............(305) 255-RTFM
Unless the host (that isn't close)......................pob 570-335
is busy, hung or dead....................................33257-0335

youngqd@jacobs.CS.ORST.EDU (Dean Youngquist) (04/13/91)

In article <1991Apr12.214209.7575@mthvax.cs.miami.edu> wb8foz@mthvax.cs.miami.edu (David Lesher) writes:
>I'm building my own version of the ICOM rapid/slow charger for my 02
>batteries, such as BP-7's,-8's and others.

Ni-Cad Batteries are usually charged at 10% of the amp hour rating
for 14 - 16 hours.  I assume that means 1/3 of the charge energy is
lost, 2/3 goes to the battery.  Example 700 maH battery charges at 70
ma for 15 hours, at which time it is fully charged.  If you want to 
charge it in 4 hours: 70 x (16/4) = 280 ma or .280 Amps.
If you dare charge it in 1 hour: 70 x 16 = 1120 ma = 1.120 Amps.
It is my understanding that battery life is significantly shortened
as the charge rate is increased past the 16 hour charge rate.