jdb@NCSC.ARPA (Brown) (01/13/87)
Hello, I have been trying to get RDCBM10 running on my C128 and have had marginal success. My configuration is a basic C128 with a 1571 and a 1541. I don't have a memory expansion so cannot use drive M: as the CP/M target drive. It appears that the first few bytes of the file are not getting written to the CP/M file (in the neighborhood of 100 +-) based on the hex dumps I did of the files I tried. I haven't done exaustive testing to determine the exact number dropped or if it is constant. I suspect that it does work with drive M: since that is apparently the configuration the author normally uses based on the defaults. Has anyone gotten it to work with any combination of 1571/1541 drives A: B: or E:? By the way, RDMS works at least for MS-DOS DS/9-sectors/track (the only format I've tried). Thanks to Frank Prindle for adapting it for the C128. David Brown jdb@ncsc