mknox@ut-ngp.ARPA (Margaret H. Knox) (01/12/87)
Can anyone point me to a program (either PD or commercial) whichi will convert CP/M disk files to TRSDOS files (and back again, if possible).? A number of the machines will be isolated, so the usual serial--serial link is not feasible. And disk speeds would be much preferrable anyaway,/. I am aware of the P&T routine TRS2CPM, but it only moves files from a TRSDOS disk to a CP/M disk. I need one that goes both ways. Any poitnernters would be appreciated.
rwwetmore@watmath.UUCP (01/13/87)
In article <2273@brl-adm.ARPA> mknox@ut-ngp.ARPA (Margaret H. Knox) writes: > >Can anyone point me to a program (either PD or commercial) which >will convert CP/M disk files to TRSDOS files (and back again, if >possible)? A number of the machines will be isolated, so the >usual serial--serial link is not feasible. I have had a Shuffleboard (TM) running in a Radio Shack MIII for three years. It runs CP/M 2.2 with builtin routines to reset the disk drives to mimic a number of different machines. It comes with two additional programs to handle TRSDOS transfers - both directions. They might be willing to help short of buying the board. There ads were in standard magazines a couple years back, or I could dig out the address if you are interested. Ross W. Wetmore | rwwetmore@water.NetNorth University of Waterloo | rwwetmore@watmath.waterloo.edu Waterloo, Ontario N2L 3G1 | {clyde, ihnp4, ubc-vision, utcsri} (519) 885-1211 ext 3491 | !watmath!rwwetmore