tech@auvax.UUCP (Richard Loken) (05/04/88)
A while ago somebody asked about connectors on a Shugart 801. I figured out the wiring on my Shugart 800 a while back but only for the power connector. Like this: 1 2 common 3 common 4 -12V 5 +5V 6 common There is a wire on pin one but I was under the impression that it went to an empty pin at the power supply. If you have -5v, pin one is probably it. I would really like a technical manual. Sigh... Its a hard life :-) ********* 73 ********** Richard Loken VE6BSV . **** .. **** Athabasca University .... **** Athabasca, Alberta Canada ..........**** ihnp4!alberta!auvax
michaele@vice.TEK.COM (Michael Enkelis) (05/06/88)
Shugart SA800/801 disk drive power J5 pin 1 +24v @ 1.3A +/- 5% J5 pin 2 +24 RTN J5 pin 3,6 DC Gnd J5 pin 4 -11v @ 0.1A +/- 38% <-- Not used on most drives. J5 pin 5 +5v @ 0.8A +/- 5% -- _ _ _ __ ' ) ) ) / /) / ` / /) Michael Enkelis / / / o _. /_ __. _ // /-- __ /_ _ // o _ tektronix!vice!michaele / ' (_(_(__/ /_(_(_(<_(/_ (___, /) )_/ <_(<_(/_(_/_)_ (503) 627-4099