marwood@DMC-CRC.ARPA (G. J. Marwood) (05/27/88)
Regarding Mike Ciaraldi's query about VT100 emulation for the Kaypro 2, and
MexPack, the MexPlus manual states that the VT100 emulator supports a keypad
in numeric mode only, not alternate mode.
There is also a Kaypro VT100 emulator (VT100KAY.LBR) in SIMTEL20 archives
and in GEnie Library #20. I don't know what sort of Kaypro this supports.
Gordon Marwoodpechter@dasys1.UUCP (Bill Pechter) (05/30/88)
In article <8805271135.AA08217@dmc-crc.arpa> marwood@DMC-CRC.ARPA (G. J. Marwood) writes: > > >Regarding Mike Ciaraldi's query about VT100 emulation for the Kaypro 2, and >MexPack, the MexPlus manual states that the VT100 emulator supports a keypad >in numeric mode only, not alternate mode. I believe Mex's overlay supports function keys and probably will support the function keys in application mode if you can redefine them on the Kaypro before running Mex. I redefined them on my Zorba using the Zorba's bios redefinition functions and setup program and they worked fine with EDT. Of course the keys did not have their definitions swapped by the escape code to put them in application mode, but since they were there already it worked fine. -- Bill Pechter {sun!hoptoad,cmcl2!phri}!dasys1!pechter USnail 103 Governors Road, Lakewood, NJ 08701 AT&T 201-370-0709 Evenings