mwilson@pnet01.cts.COM (Marc Wilson) (06/10/88)
Richard:
Z33 can be *easily* installed into the package you already have. If you
have a Z3BASE.LIB file for the configuration you're running, all you have to
do is assemble ZCPR33.Z80 with that as input. Then slam the resulting .HEX
file into your system image.
If you don't have Z3BASE.LIB, it gets a little more complicated. Use
Z3LOC to build Z3BASE.LIB. You should have a copy of your configuration
floating around, anyway.
About two years ago, I did a manual install for ZCPR3 for my Ampro
LB/Z80. When I got Z33, all I did was re-assemble. It *is* a drop-in
replacement.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Marc Wilson
ARPA: ...!crash!mwilson@nosc.mil
...!crash!pnet01!pro-sol!mwilson@nosc.mil
UUCP: [ cbosgd | hp-sdd!hplabs | sdcsvax | nosc ]!crash!mwilson
INET: mwilson@crash.CTS.COM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~