kenb@techsup.UUCP (07/25/88)
....zzzzz perhaps someone can help shed some light on a problem i'm having. i run pickles and trout cp/m 2.2mh on a radio shack model ii/16 with a 15 meg hard drive. for some time i've been successfully running zcom on the system, but this eats up quite a bit of my tpa and so i have memory problems with programs that are tpa hungry... compilers, ark02, ... i located a copy of zcpr1, assembled it for cb00h, where my stock ccp loads, inserted it in the appropriate p&t hard drive file (bioscp/m.pnt), fixed the relocation bitmap for it and ran it. no problems so far. i figured i'd use zcpr1 when i had to do memory hungry stuff, and load zcom when not. with the zcpr1 loaded, i typed in the command to bring up zcom (with zrdos and zcpr33 installed) as normal. the first indication i got that things weren't loading well was when hsh errored and told me it needed zcpr33 to run. things whirred and clicked a moment longer and then settled out to the prompt ">". not much functionality was left at this time... although zcx worked. so... the question is, since the zcpr1 ccp fit exactly where the stock ccp resided, why didn't zcom sign on correctly? i even tried doing the zcld again... but things didn't change. i figure i'm missing something obvious.... if you have any ideas, please let me know. thanks... ken brookner uucp: ...sys1!techsup!kenb GEnie: kbrookner