Apple DOS3.3 file transfer

paul@athertn.Atherton.COM (Paul Sander) (10/10/88)

Hello, net.wizards:

I own an old Apple II Plus, and have installed a "CP/M Card [TM]" from
Advanced Logic Systems.  The Card runs CP/M 3.0 in a banked memory
configuration.

What I am looking for is a way of converting files from CP/M format to
DOS 3.3 and vice-versa.  I have looked into CP/Muffin from A.P.P.L.E., but
it does not transfer files to CP/M format, and for some reason I have not
had much luck coaxing it to transfer file from CP/M to DOS either.

I would appreciate any leads you can give me.

Many thanks in advance,

Paul Sander
paul@athertn.Atherton.com
{decwrl,sun}!athertn!paul

matthew@sunpix.UUCP ( Sun NCAA) (10/11/88)

In article <230@athertn.Atherton.COM>, paul@athertn.Atherton.COM (Paul Sander) writes:
> 
> What I am looking for is a way of converting files from CP/M format to
> DOS 3.3 and vice-versa.  I have looked into CP/Muffin from A.P.P.L.E., but
> it does not transfer files to CP/M format, and for some reason I have not
> had much luck coaxing it to transfer file from CP/M to DOS either.
> 
> I would appreciate any leads you can give me.
> 
What you need is a program called 'Chameleon'. It does file transfers between 
almost all of Apple 16 sectors formats. It will work on ProDOS, DOS 3.3, Pascal 
and CP/M files. Its shareware, available on most BBS'.  Your system will need a 
16K ram card in slot 0 since it runs under ProDOS.

Hope this helps

-- 
Matthew Lee Stier     (919) 469-8300|
Sun Microsystems ---  RTP, NC  27560|          "Wisconsin   Escapee"
uucp: {sun, rti}!sunpix!matthew     |