olmiller@LUDWIG.SCC.COM (Otto Miller) (10/23/88)
A little background info... I am posting this request to both info-kermit and info-cpm since I am not sure where my problem is. I have installed several variations of unix c-kermit and now I am ting to install cpm-80 kermit. The specifics; I am using a Xerox 16/8 (5.25" floppy + HD). Since the hart of the 16/8 is a Xerox 820 (like) board I used the sys-dep. overlay for the Xerox 820 (cpvxer.hex) with the sys-indep. (cpsker.hex) hex file to generate the .com file. All went well up to this point. The problem appears when I connect... I get nothing out the serial port! I looked at the source to see if port B was used, but everything points to port A. I have been unable to hang a protocol analyzer to confirm no output, but when I hang a known good modem on the port I get nothing... not even garbage. WHAT's WRONG? Any and all help, pointers, etc. with constructive flames are solicited. PLEASE email directly to me in that I am not on regular distribution for this group; Thanks. Thank you in advance for all the help. ======================== #include std_disclaim.h In real(?) life: Otto L. Miller Contel FSS/ASD email olmiller@ludwig.scc.com Fairfax, VA 22033 703-359-7500