paravia@csd4.milw.wisc.edu (Mark David Kakatsch) (02/23/89)
All right...Thanks to some really great people, I got my last question answered. That, however, just led to another one. If I have a C/PM system disk, how can I modify it so that it would work w/ my serial card and terminal? How could I tell the system disk that my card is addressed as port 4, and that control is at 84, and how can I tell it which bits in the control byte stand for Receive Buffer Full, or Transmit Buffer Full, etc... My main concern here, is, is that even if I get the drives working, I'm relatively sure that I've transhed my System disk. I have another one, but I'm not sure if it'll work. I've heard from a couple of people who have Tarbell equiptment they would sell me, but before I buy anything, I'd like to know if I can USE any of it w/ my present setup... Thanks much! Mark +-----------------------------------------------------------------------------+ + Things are not what |Albert Einstien got his name after he got smashed + + they appear to be... |after drinking one stien of beer. Hence; Albert + +________________________|EinStien.___________________________________________+ + Ack! Ack! Ack! Ack! Ack! |Mark D. Kakatsch --> paravia@csd4.milw.wisc.edu + + Pfhtph! Pfhtpph! Pfhtpf! | uwmcsd1!uwmcsd4!paravia + +-----------------------------------------------------------------------------+