mknox@EMX.UTEXAS.EDU (Margaret H. Knox) (03/30/89)
For Greg Argendeli who is having trouble backing up his P&T CP/M boot disk: Greg, if you are using versin 2.2E (or even older) you may have a problem. Version 2.2E had copy protection on the boot disk -- you could make as many boot disks as you wanted, but they all had to be made from the MASTER diskette. Older 2.2a-d version had a SYSGEN utility which had to be run in order to move the boot tracks (which are single density, partly!). If you have a current version (2.2m or 2.2mH) then just run CLONE and follow the questions. If not, you probably should consider getting upgraded. The upgrade for you (since you already have the system) would only be $45 plus $3.50 shipping. If interested (and I hate to sound commercial here, but this IS the answer to your question) send a note to: TriSoft 1825 East 38 1/2 Austin, Texas 78722 (512) 472-0744 Be SURE to give your OLD P&T serial number, and if you want 2.2m (floppy only) or 2.2mH (floppy plus hard disk). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - I *do* have a relationship to TriSoft, but will not get rich off of a $45 transaction. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -