keithm@wicat.UUCP (Keith McQueen) (06/21/89)
Hello! I don't normally post to this group though I have been reading it for a while. My question: I recently picked up a a swap meet an IMSAI 8080 computer with a pair of MITS 8" diskette drives. I'm sorry I don't have the model number with me, but the controller is a two board set with ribbon cables connecting from the right side of the boards looking from the front of the machine. Does anyone have CP/M configured for these drives? I can do the console driver if I have to, but I don't have the time to write disk drivers, formatters, boot code etc. I would love to get this old beast up and running! The computer seems to operate ok, I was able to key in a short program through the front panel and run it. (I wouldn't want to key in a long one! :-)))) I have the documentation on all of the other boards in the machine. I just need info and software on the MITS disk system. Thanks loads in advance!!! -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - | Keith McQueen, Wicat Systems Inc. , (801)224-6605 | My opinions are | | N7HMF @ NV7V (84058), 147.34+, 449.675- | all mine... | - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -