les@uwovax.uwo.ca (11/30/89)
I have an OSBORNE 001 with the external video option and monitor. The external video worked for a while. However, it has not worked since I ran the CP/M SETUP program (to change a printer device). This may have been coincidental with unplugging the external video connector while the Osborne was powered on. Does anyone know if there is a common problem that might occur with the Osborne video output? How can it be fixed? Are any circuit diagrams available? I'm confident that the CPU and other circuitry are okay. The problem seems to be in the video output. BTW, I don't have the plug marked "Warning do not remove with power on" so I can't try the internal monitor to see if that works. Any help would be appreciated. Thanks, --- Les Flodrowski CA: les@vaxi.sscl.uwo.CA Social Science Computing Laboratory Bitnet: les@uwovax.BITNET University of Western Ontario UUCP: les@julian.UUCP London, Ontario, Canada, N6A 5C2 (...!watmath!julian..)