ac959@cleveland.Freenet.Edu (Ed Grey) (06/26/90)
Subject: MNP level 4 to MNP level 5 I am using an EMEX 2400EC modem which supports MNP level 4. Whenever I call to an HST modem with MNP level 5 I cannot connect with error correction (MNP). It is my belief that when 2 modems that support MNP are attempting to connect, they should step down until they reach a level of MNP that is supported by both modems. I can connect to PC-Pursuit with MNP error correction and they only support up to level 3. I can also cause PC-P's outdial modems connect to an HST (MNP level 5) modem. I just cannot make my modem connect directly with an HST (level 5). Any suggestions? MNP, up to level 4, is supposed to useful in using modems over dirty phone lines. Sometimes my line get quite noisy and it would be useful to be able to use this feature. Thanks in advance. NOTE: The modem is manufactured by INCOMM DATA SYSTEMS, INC. and I'm using it on a TeleVideo TS803H CP/M system. -- Ed Grey (ac959), Sysop of The Grey Matter BBS & RCP/M 213-9716260 Internet: ac959@cleveland.freenet.edu Bitnet: ac959%cleveland.freenet.edu@cunyvm Fidonet: 1:102/752 or 1:102/743